Some people shouldn’t get within ten feet of a toolbox. Presumably, this 44-piece tool set tucked inside Thor‘s hammer will know who you are and prevent you from doing any further damage. Only the worthy will be able to lift it.
Note: If you purchase one of the awesome products featured below, we may earn a small commission from the retailer. Thank you for your support.
Videos by ComicBook.com
On the outside this tool set looks like Mjolnir, but open it up and you’ll find a standard hammer, a tape measure, a level, a screwdriver, a wrench, a ratcheting wrench, and a utility knife. Indeed, you’ll feel like a god when you wield it to battle the deadly KALLAX you bought from IKEA for your record collection. You can order the Marvel Thor hammer tool set here. Check out the spec list below for a list of all the tools available in the Mjolnir set.
Includes:
• 6″ pliers
• 10 foot tape measure (metric and imperial) with stopper, belt clip, and lanyard
• 24 1/4″ sockets
• Metric: 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10, 11, 12, 13, 14
• Imperial: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2
• 2″ extension bar for sockets
• 2-in-1 stubby ratchet screwdriver with 6 bits
• 30mm double-ended bits: PZ2 x H5, PZ3 x H6, PZ1 x H4, PH1 x SL4, PH2 x SL5, PH3 x SL6
• 3 1/4″ extension bar for bits
• 6″ wrench
• 40Cr quick-release ratchet wrench
• 13 oz. claw hammer
• Level
• 4″ folded knife (with 5 replacement blades)
• 4 drive brake caliper tool bits
• Cross slot bits: PH3, PH3
• Slot bits: SL5, SL6
• Dimensions: 15″ tall x 9″ wide x 6″ deep (closed)
• Weight: 5 1/2 lbs.
Related Posts
-
What If…Donald Duck Became Thor #1 cover
